REM Manufacturing - Swift Current, Saskatchewan

skip to main content

This site will look much better in a browser that supports Web standards, but it is accessible to any browser or Internet device. You can get a free download of the most current browsers from Internet Eexplorer Browser or Netscape Broswer

View Video of Product Link to German REM Manufacturing site Link to Russian REM Manufacturing site

Harrow Tyne Quote Questionnaire

Print the questionnaire and then fax to Rem at 306-773-1188.

Harrow tynes come in many shapes and forms. In order for us to provide a proper quotation we must receive a drawing to quote from. When producing your drawing, use the picture below to guide you in deciding which dimensions are most important.

This picture shows a very basic harrow tyne. Your design may vary greatly from this one.

It will also be very useful if you can describe to us how the tyne will be mounted, i.e., clips or bolts, etc.

When selecting dimensions and material size and type, keep the following in mind:

Wire Diameter

  • Most Rem harrow tynes are made from wire diameters between 0.156" and 0.500"
  • The greater the wire diameter used, the larger the coils and loops must be. As a guide:
    • Full Coils, min coil diameter = 4 x wire diameter (some restrictions apply)
    • For Loops and hooks, preferred inside radius = 1.5 x wire diameter

Material

  • Rem normally uses 3 kinds of material for harrow tynes.
    • Class II OT - Most common, strongest, best wear characteristics.
    • Class I OT - Slightly better forming characteristics than Class II OT, but lower strength and wear characteristics.
    • Hard Drawn - Cheaper wire, lower strength and wear characteristics, better forming characteristics
  • Class II OT is not used when the wire diameter is 0.500" or larger

Shenandoah Info

REM Manufacturing Inc., Shenandoah, Iowa
http://shenandoahiowa.net
Map of Shenandoah, Iowa

Dealer & Rep Login

Username:
Password: