REM Manufacturing - Swift Current, Saskatchewan

skip to main content

This site will look much better in a browser that supports Web standards, but it is accessible to any browser or Internet device. You can get a free download of the most current browsers from Internet Eexplorer Browser or Netscape Broswer

Torsion Spring Quote Questionnaire

Print this questionnaire and then fax to Rem (306-773-1188)

Please fill in as much information as possible. If not all specifications are known, try to fill in the minimum required from each section. The most important specification is at the top of each section. Often it is necessary to provide us with a drawing, especially if special ends are required. If tolerances are known, specify these as well.



Contact Information:

Name:
Company Name:
Phone Number:
Email:

Need at least three of these:

Load Rate (lb.in/deg):
Coil I.D.
Wire Diameter:
Active Coils:

Must have:

Diameter of Shaft Spring Must Work Over:
Length of Space Available (L):
Length of Moment Arm:
Quantities required:
End Style:

Should Specify These:

Finish:
Painted Unpainted
Shot Peened:
Plated:



Direction of Coil (If Important):
Material (If Special Required):
Any Special Requirements:
Your Part Number:

Need at least 2 of these:

Free angle between legs:
Maximum delfection:
Load at Maximum Deflection (in.lb):

 

If some of spring specs are not known, but required loads are, use this section

Spring load must be in.lbs at deflected angle of degrees and spring load must be in.lbs at deflected angle of degrees.

   

Dealer & Rep Login

Username:
Password: